Effects of laser polishing on surface quality and mechanical properties of PLA parts built by fused deposition modeling

Fused deposition modeling (FDM) produces parts through layer by layer on the top of each other, making it almost impossible to obtain smooth printed parts. Hence, there is a huge demand for the postprocessing of the FDM-printed parts. Laser polishing is a novel technique that can be used to polish products to obtain a smoother surface. The aim of this work was to explore the feasibility of surface-finishing FDM-printed polylactic acid (PLA) parts by laser polishing. The surface roughness, surface morphology, dynamic mechanical analysis (DMA), and tensile properties were investigated. The results indicated that the lower laser power and the bigger laser beam diameter within a certain range could facilitate the formation of smoother surface. With optimized parameters, the surface roughness was reduced by 90.4%. DMA showed that the storage modulus (E’) and glass transition temperature of PLA specimens were significantly improved due to the decrease of molecular mobility of denser structures. Moreover, the tensile strength and Young's modulus of the PLA specimen were also significantly increased after laser polishing. The fracture morphologies were observed, and the possible strengthening mechanism was also discussed. These results indicated that laser polishing could be an efficient method for surface polishing of FDM parts. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48288.     

聚乙烯管材耐慢速裂纹增长性能研究进展

简要介绍了聚乙烯管材发生慢速裂纹增长(SCG)的机理,并详细介绍了影响聚乙烯管材耐SCG性能的影响因素,包括系带分子(TMs)、界面相和无定形相的活动性,以及聚乙烯管材专用料的研发和熔融加工过程中的结构与形态控制研究。     

Micromorphology,pharmacognosy, and bio‐elemental analysis of an important medicinal herb: Verbascum thapsus L.

The present study was conducted on characterization of morpho‐anatomical, phytochemical, and bio‐elemental analysis of root, stem, and leaf of Verbascum thapsus. Morphologically Verbascum is a biennial plant that flowers for a month and a half in mid‐ to late summer. Various organoleptic features of root, leaf, and stem were recorded. Anatomically the T. S of the root, stem, and leaf showed a typical dicot histological differentiation. Leaf possessed anomocytic stomata, crescent shape vascular bundles, and covered with long and stellate type trichomes while, stem contained collateral type of vascular bundles and a well‐developed pith to store phytochemicals responsible for various pharmacological activities. The powder drug study through scanning electron microscopy revealed the presence of various types of tissues. Branched, tree like and stellate trichomes in root and leaf help in absorption and reduce loss of water. These anatomical features are responsible for the survival of the plant as biennial. Four macro elements (Na, K, Ca, and Mg) and seven microelements (Cr, Cu, Fe, Mn, Ni, Zn, and Cd) and their concentrations in ppm were also studied using Atomic Absorption Spectroscopy. Phytochemical screening of methanolic extract showed existence of various secondary metabolites, while mucilage and anthraquinones was not detected. The present study helps to understand the taxonomic identification of the plant based on morpho‐anatomical features and throws the attention of the researchers to carry out the work for developing its various formulations, which can ultimately be beneficial for the human beings as well as animals.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Taxonomic importance of pollen morphology in Veratrum L. (Melanthiaceae) using microscopic techniques

Previous studies reported that intrageneric relationships of genus Veratrum of family Melanthiaceae are controversial and hard to delimit. Therefore, we observed the pollen morphological features of six species in the genus Veratrum in detail using both light microscopy and scanning electron microscopy and investigated their significance for Veratrum taxonomy. Among them, five were studied for the first time. The results demonstrated that pollen grains of Veratrum are medium in size with P/E being 0.31–0.60. Three types of shape in polar view have been observed elliptic, long‐elliptic, or wide‐elliptic with blunt or rounded at both ends. Two types of width of colpus reported narrow or wide, two types of depth of colpus reported deep or flat, and two types of length of colpus reported extend almost or do not extend to the ends, whereas two types of colpus membranes reported absent or obvious. One type of surface ornamentation was noted as reticulate. These results support species Veratrum album and Veratrum lobelianum as well as Veratrum grandiflorum and Veratrum oxysepalum as two independent species, respectively, rather than classifying Veratrum into two sections. Overall, we demonstrated that the ratio of polar axis length to equatorial axial length, pollen characteristics at the polar view, the colpus morphology, and the surface ornamentation of pollen grains of genus Veratrum have important systematic significance in identification and delimitation of species.     

Gestational Exposure to Bisphenol A Affects Testicular Morphology,Germ Cell Associations,and Functions of Spermatogonial Stem Cells in Male Offspring

Exposure to bisphenol A (BPA) in the gestational period damages the reproductive health of offspring; detailed evidence regarding BPA-induced damage in testicular germ cells of offspring is still limited. In this study, pregnant mice (F0) were gavaged with three BPA doses (50 μg, 5 mg, and 50 mg/kg body weight (bw)/day; tolerable daily intake (TDI), no-observed-adverse-effect-level (NOAEL), and lowest-observed-adverse-effect level (LOAEL), respectively) on embryonic days 7 to 14, followed by investigation of the transgenerational effects of such exposure in male offspring. We observed that the NOAEL- and LOAEL-exposed F1 offspring had abnormalities in anogenital distance, nipple retention, and pubertal onset (days), together with differences in seminiferous epithelial stages and testis morphology. These effects were eradicated in the next F2 and F3 generations. Moreover, there was an alteration in the ratio of germ cell population and the apoptosis rate in germ cells increased in F1 offspring at the LOAEL dose. However, the total number of spermatogonia remained unchanged. Finally, a reduction in the stemness properties of spermatogonial stem cells in F1 offspring was observed upon LOAEL exposure. Therefore, we provide evidence of BPA-induced disruption of physiology and functions in male germ cells during the gestational period. This may lead to several reproductive health issues and infertility in offspring.     

Characterisation of the microplasma spraying of biocompatible coating of titanium

This paper presents new results of studying the influence of parameters of microplasma spraying (MPS) of Ti wire on the structure and properties of Ti coatings. Based on the design of the experiment and the results of the SEM study, certain spraying modes were chosen to form the desired composition and structure of the Ti coating.  The dense sublayer (up to 300 µm thick) provides good adhesion to the substrate, and a porous top layer can accelerate the coated implant ingrowth with the bone.  This technology is developed for the manufacture of coated endoprosthesis implants.     

CMAS对热障涂层界面裂纹和残余应力的影响

随着航空发动机涡轮叶片工作温度的提升,使得一种主要由CaO,MgO,Al₂O₃和SiO₂组成的玻璃态物质(CMAS)对热障涂层的危害越来越严重,从而对热障涂层的性能和耐久性有了更高的要求。本文以电子束物理气相沉积热障涂层为研究对象,利用有限元方法研究了CMAS的渗入对界面裂纹扩展及CMAS对陶瓷层(TC)内部残余应力的影响规律。采用波长固定、振幅变化的正弦曲线表示不同粗糙度的涂层界面,同时考虑了CMAS的弹性模量变化的影响及不同界面形貌与CMAS之间的相互作用。结果表明：CMAS弹性模量的增加对界面裂纹具有抑制作用,并且TGO幅值和厚度越小,抑制作用越明显。CMAS弹性模量对TC层最大残余应力S₂₂的影响存在临界点,在临界点之前,CMAS弹性模量的变化对TC层最大残余应力的影响较大,随着CMAS弹性模量的增加,TC层最大残余应力大幅度减小；在临界点之后,TC层最大残余应力基本不受CMAS弹性模量变化的影响。这些结果对电子束物理气相沉积喷涂的热障涂层失效机理的研究具有重要意义,可以为热障涂层界面的优化提供指导。